When I first got the 3G, I decided to hold off on jailbreak till it was out for awhile and hopefully most of the bugs worked out. Now I’m not saying its as clean as some of the jailbreaks 1.0.2+, but the 2.0.2 pwn’s are starting to look good.\u00a0 After reading near 100 comments, I started to get enough warm fuzzies to give it a shot.<\/p>\n
So the question is: should you jailbreak?\u00a0 If you have never jailbroken the phone, are happy with the apps you have so far, and cannot risk ANYTHING going wrong the phone, then no.\u00a0 Don’t even bother. But for those of you who are looking to take the iphone to the promised land; record live video, custom graphics for everything (i.e. I use steampunk analog battery meeter), SSH, Master control of powering on\/off (3G, WIFI, Email), Quake (yes, the full Quake) etc, etc, then perhaps this is the time. In September Steve Jobs said there would be another update.\u00a0 I may or may not update again depending on if it fixed the bug of the $&#*( keypad staying on when on a phone call). On my next post I’ll talk about the apps I’ve downloaded.<\/p>\n
I posted more info and links on the jailbreak here <\/a>in my previous post.<\/p>\n My iphone is already at 2.0.2, so that is what I used.\u00a0 To do this jailbreak, you need 2 files.<\/p>\n QuickPwnGui120.exe<\/a> and iPhone 1,2_2.0.2_5C1_Restore.ipsw<\/a><\/p>\n The process was not perfect.\u00a0 First off, since the mac version is not working, I used my laptop. When I first started the process, it would not work.\u00a0 Why not? Because I did have itunes on the laptop!\u00a0 So installed itunes and did a sync without music, pictures, address book or anything else.<\/p>\n Started the process again.<\/p>\n Once you are given the choice of what type of phone to pwn, I have the 3G, a nice ‘are you ready?’ button comes up with the steps you have to take.\u00a0 Non of these steps are command line, but more of ‘can you follow basic instructions?’ type. \ud83d\ude42\u00a0 You will be asked to hold down the top power button (5 sec I think), then the home button (so both are held down (another 10 sec I think)) then let go of the top button while holding down the home button. (30 sec I believe) Think you can handle that?<\/p>\n Good.\u00a0 Now, connect your phone to your PC and then turn the phone off.<\/p>\n The first time I tried it, it stalled on me for some reason. I tried it again and it worked great. A word of advice though, take your case off.\u00a0 I have a pretty think rubber case and pressing and holding the home button got a bit tiresome.\u00a0 Although it said to hold for 30 seconds, I was holding for a min and half till it rebooted.<\/p>\n So far, so good.\u00a0 The reboot can take quite a while (1-2 min), so be patient. Also, as soon as your phone comes up, disconnect the cable.\u00a0 It will not hurt anything to leave it plugged in, but mine did a power on\/power off loop. Annoying.<\/p>\n Just to be safe, do a clean reboot.\u00a0 Power off, power on with the phone disconnected.<\/p>\n You should be good!\u00a0 On my next post, I’ll talk about the applications I have loaded.<\/p>\n Post Script…<\/p>\n Since pwning the phone, I’ve noticed the wake from sleep (turn on) is much slower as well as some of the more memory intenive OS apps taking a bit longer to load. Not sure what is causing it.\u00a0 However, once the applications load, they work fine enough… known bugs not withstanding.<\/p>\n